Black Box 32144 Manual page 32

PRI
0 1 2 1 2 0 8 5 2
Speed type: 0=Auto (V.32/208), 1=V.33, 2=V.32/32bis, 3=Bell 208
Speed limit, min. (bps): 0=9600, 1=4800, 2=2400,3=1200
Speed limit, max. (bps): 0=9600,1=4800,2=2400,3=12000,4=600,
Buffer mode/speed conversion: 0=enable, 1=disable
V.42 mode : 0=off, 1=mandatory, 2=automatic
Dialer mode: 0=off, 1=Hayes, 2=DTR dialing;
Character length (bits): 0=8, 1=9, 2=10, 3=11
Data format: 0=sync, 1=async
Line type: 0=2--wire dial, 1=2-wire leased, 2=4-wire leased
NOTES: Speed limit, min., and speed limit, max.: 7200 bps parameters
are available only if V.32bis mode is enabled.
ALX V.32 and ALX V.32M only: Available speed limit selections: Max., 0-7 and A;
min., 0=6 and 9. Default max. speed limit setting: 0 (9600 bps).
Speed type: Settings 0, 1 and 3 are not available on all all ALX models.
LCD
4=600, 5=0-300,6=1200/75,7=14,400, 8=12,000, 9=7200
5=0-300, 6=EIA-23, 7=1200/75, 8=14,400,9=12,000,A=7200
3=V.25bis, async; 4=V.25bis, sync, character-oriented;
5=V.25bis, sync, bit-oriented; 6=Penril mode
Fig. B-1. Primary Options.
APPENDIX B: Summary Setup
169