Table of Contents
Advertisement
Table 6-1. V.25bis Autodialer Commands
Command
CIC
CRN n
CRS m
DIC
PRN m; n
RHA
RLN
RLN m
n represents a number to be dialed or stored (e.g., 5557979);
m represents a memory address where a number is stored (0-9).
A comma (,) can be included in a dial string to effect a pause.
A colon (:) can be included to instruct the autodialer to wait for a dial tone
before proceeding.
Function
Connect next incoming call.
Call request—dial number (n) entered on DTE
keyboard.
Call request—dial number stored in specified
memory address (m).
Disregard incoming calls.
Program normal—store number or dial string n in
memory address m.
Switch to Hayes dialing mode (also resets modem
configuration).
Request list of all stored numbers.
Request to see number stored at address m.
CHAPTER 6: V.25 bis Autodialer
131
Hide quick links:
Advertisement
Table of Contents
