Black Box 32144 Manual page 93

commands and save them to
profile 0 using the &W command,
the changes made using Hayes
commands and saved to profile 0
will override the front-panel
selections.
A Quick Setup will overwrite
most modem option settings.
However, certain option settings
stored in user profile 0 are not
altered by Quick Setup—unless you
change the configuration from one
Quick Setup type to another. The
following parameters in user
profile 0 are not affected by a
Quick Setup of the same type:
Option settings set by the Hayes
compatible commands E, F, Q, V,
X, &J, &L, &P, &M, &Q, &Z, and
\V; and S register values in registers
S18, S25, and S26. A factory reset
will reset these parameters—and all
others—to the factory-default
settings.
User Profile 1
User profile 1 is not linked to the
front panel.
• Option changes made from the
front panel are not saved to
profile 1. Profile 1 can be
changed only by using Hayes
commands or the Summary
Setup feature.
• If profile 1 is recalled as the
active configuration, the LCD
screens will not be affected.
(This means that when profile
1 is active, it is possible for the
CHAPTER 5: Hayes Emulation Mode
LCD to display an option
setting that does not reflect the
setting currently in effect.)
• If profile 1 is changed by means
of Hayes commands or via the
Summary Setup feature, the
changes will not be reflected on
the LCD and will only affect
Hayes mode operation.
If profile 1 is being used as the
active configuration, the options
marked with an asterisk (*) in
Table 5-1 should be controlled by
using the AT commands listed in
Table
5-1 or by using the Summary Setup
feature described in Appendix B.
When profile 1 is active, these
options can be changed via the
front panel LCD, but the changes
will not be effective for Hayes mode
operation. (However, if profile 0 is
subsequently recalled as the active
configuration, the changes will be
effective at that time.)
5.7 Facsimile (Fax) Transmission
Fax operation is available in Hayes
mode only. The modem supports
fax classes 1 and 2. You can use
your modem with a fax program to
transmit and receive facsimile data.
5.8 Hayes Mode Reference Tables
Table 5-1 lists the Hayes compatible
commands that can be used with
the modem.
111