Table of Contents
Advertisement
MODEM 32144
Table 2-1. Available Quick Setup Configurations.
Quick Setup as Identified on LCD
QUICK SETUP <1>
2-W DIAL (HAYES)
QUICK SETUP <2>
V25 DIAL (Async)
QUICK SETUP <3>
V25 DIAL (Syn_c)
20
Description
2-Wire Dial Hayes Emulation Mode—
This Quick Setup (for communication
over ordinary phone lines) allows the
modem to automatically dial (autodial) a
previously stored phone number and
respond to Hayes commands. This
mode is compatible with communication
software packages that use Hayes™
style "AT" commands. The Hayes
mode Quick Setup is the factory-
default configuration for the modem.
2-Wire Dial V.25 bis Mode,
Asynchronous—In V.25 bis mode,
the modem operates in conformance
with CCITT recommendation V.25 bis,
allowing you to store and direct
dial or autodial phone numbers
from the DTE. Use Quick Setup
2 if the DTE connected to the
modem is asynchronous.
2-Wire Dial V.25 bis Mode,
Synchronous, Character-
Oriented—Same as Quick Setup
2 except for data protocol. Use
Quick Setup 3 if the DTE is
synchronous, character-oriented.
Hide quick links:
Advertisement
Table of Contents
