Black Box 32144 Manual page 37

MODEM 32144
misc 1
1 2 3 0 0 0 0
misc 2
0 1 0 0 0 0 0 F F F F 1 0 0 0 0 0 0 0 0
V.13 operation: 0=off, 1=TX only, 2=RX only, 3=TX and RX
DTE=DCE speed: 0=disable, 1=enable
Penn/V.25bis DTR dialing: 0=enable, 1=disable
174
"misc1," "misc2," and "misc3" are displayed to help indicate
the relative positions of individual options across the LCD.
The "misc2", and "misc3" options are identified below.
Op. mode fallback: 0=Bell 212A and 103, 1=V.22/V.21/V.23
Remote test: 0=enable, 1=disable
DSR during ALB: 0=enable, 1=disable
FP: 0=enable, 1=disable
LCD intensity: 0, 1... 7 (7=greatest intensity)
Speaker volume: 0=low, 1=medium, 2=high
Speaker control: 0=on, 1=on till CD, 2=off
misc 3
Multimode handshake: 0=T1 timer,
1=V.32bis Annex A
Answer tone detection: 0=enable, 1=disable
Answer tone detection: 0=enable, 1=disable
Fig. B-9. Miscellaneous Options.
Low-profile DIAG LED:
0=Connect status, 1=DTR status
CFI AB response on disconnect:
0=disable, 1=enable
Wait for MNP link request (sec): 0=3, 1=7
Leased line interrupt:0=off, 1=on
Remote RTS signaling: 0=off, 1=on