MODEM 32144
Code
CFI AB
CFI CB
CFI ET
CFI ND
CFI NS
CFI NT
1 Column 3 indicates which modem sends the result code. (ANS/ORG indicates
answer and/or originate modem.)
A semicolon is used to separate parameters,. e.g., LSN 4;5559797.
134
Table 6-3. V.25 bis Result Codes
Meaning
Call failure—call aborted because of
loss of DTR or because HANGUP was
selected from front-panel AUTO-DIAL
screen.
Call failure because DCE is busy.
(Modem dialing or handshaking as
a result of a front-panel dial
request.)
Call failure because of busy signal.
(Engaged tone.)
Call failure—no dial tone. Modem did
not detect dial tone or line current
during dialing or handshaking.
Call failure—call request specified
an address that does not contain
a stored number. (No stored
number.)
Call failure—no answer tone. Remote
unit answered but did not issue
answer tone.
Sent by— 1
ORG
ORG
ORG
ORG
ORG
ORG