Black Box 32144 Manual page 34

eia
0 1 0 1 1 1 0 0 0
V.42 <1> V.42
0 0 3 3 5 3 1 1 2 0 0 0 0 1 0 2 1
DTE pass-through flow control: 0=enable, 1=disable
Flyback buffer: 0=enable, 1=disable
Break handling: 0=none, 1=destr./expedited, 2=non-destr./expedited,
3=non-destr./non-expedited
MNP class (limit): 1=class 1, 2=class 2, 3=class 3, 4=class 4, 5=class 5
Flow control, DCE to DTE: 0=none, 1=CTS, 2=DC1/DC2, 3=DC1/DC3
Flow control, DTE to DCE: 0=none, 1=RTS, 2=DC1/DC2, 3=DC1/DC3
Parity: 0=none, 1=odd.2=even, 3=mark, 4=space
DTE speed (bps): 0=38,400, 1=19,000, 2=9600, 3=4800, 4=2400,
5=1200, 6=600, 7=300, 8=110
Fig. B-5. V.42 Error Correction Options.
CD and DSR delay: 0=disable, 1=enable
Test mode: 0=normal, 1=true
Remote digital loopback test: 0=enable, 1=disable
Analog loopback test: 0=enable, 1=disable
CTS: 0=normal, 1=follow RTS, 2=true, 3=on
Carrier detect: 0=normal, 1=true, 2=toggle
DSR: 0=normal, 1=true, 2=crossover
DTR: 0=normal, 1=true
Fig. B-4. EIA Interface Options.
<1>
Link flow control: 0=disable, 1-enable, 2=slaved
DCE pass-through flow control: 0=disable, 1=enable
Selective retransmission: 0=disable, 1=enable
V.42bis: 0=enable, 1=disable
V.42 protocol: 0=LAPM only, 1=MNP only, 2=LAPM/MNP
APPENDIX B: Summary Setup
"V.42 <1>" and "V.42 <2>" are displayed
to help indicate the relative position of
individual options across the LCD.
171