Table of Contents
Advertisement
There are 15 QUICK SETUP
screens, one for each Quick
Setup configuration. For a brief
description of each Quick
Setup configuration, see Table
2-1.
4. When the LCD shows the
Quick Setup configuration you
want, press pushbutton 2. This
will cause the bottom line of
the display to flash on and off.
CHAPTER 2: Quick Start
5. Press the ENT button twice. As
you do this, you will see SETUP
screen 1; then—after you press
the ENT button a second time
—the modem will reset. (It is
at this point that the selected
Quick Setup actually takes
effect.)
The modem is now set up for
the Quick Setup configuration
you have selected. All options will
be set as shown in Appendix A. If
you want to customize the Quick
Setup configuration by changing
individual options, see Chapter 3.
For Hayes mode options, see also
Chapter 5.
19
Hide quick links:
Advertisement
Table of Contents
