Black Box 32144 Manual page 74

MODEM 32144
6.3 Dialing Parameters
Table 6-2 lists dialing parameters
that may be used with the CRN
command to modify dialing
operations.
(Table also applies to Dumb mode and Bell 208 operation)
Characters that can be pulse or tone dialed: 0-9
Can only be tone dialed:
L
P
T
W or : (colon)
[CR] or .
(carriage return
or period)
, (comma) or <
132
Table 6-2. V.25 bis Dialing Parameters
A, B, C, D, #, and *
Links a phone number to
another number to be dialed
as an alternate when the primary
number is busy or does not
answer. See L—Link in Section 5.4.
Sets pulse dialing mode.
Sets tone dialing mode.
Wait 30 seconds for dial tone before
proceeding.
Required at end of dial command line.
[CR] is sent from DTE keyboard.
Dumb/208 mode only: period has same
function, but may be entered via the
front panel (PHONE LCD screen).
Pause before processing next character
in dial string.