Table of Contents
Advertisement
MODEM 32144
Table 5-1. Hayes Compatible Commands (continued)
Command
Sn=v
Sn?
T
V
V0
V1
W
X
X0
X1
X2
X3
X4
Y
Y0
Y1
Z
114
Function/Explanation
MODIFY S REGISTER. n is the register to be
modified; v is the value to be written.
READ S REGISTER. n is the register to be
read.
TONE DIAL. No parameters.
WORD/DIGIT RESULT CODE
Result codes are transmitted as digits.
Result codes are transmitted as words.
WAIT FOR DIAL TONE No parameters, but
default wait time (register S7) is 30 seconds.
SELECT RESULT CODE
Selects basic result codes, 0-4.
Modem will blind dial (without dial tone).
No speed indication; no busy or dial tone detect.
Selects result codes 0-6, 10, 11, 13, 14, 15, and
18.
Same as X1 except busy signal detect is
enabled. Selects result codes 0-5, 7, 10, 11,
13, 14, 15, and 18.
Same as X1 except busy signal detect is
enabled. Selects all result codes. Connection
speed (up to 14,400 bps) indicated; busy
signal and dial tone detect enabled.
Note: Result code 8 is independent of the X
command; it is displayed only when the @ dial
modifier is used.
LONG SPACE DISCONNECT*
Disables long space disconnect.
Enables long space disconnect.
RECALL STORED USER PROFILE
Hide quick links:
Advertisement
Table of Contents
