Table of Contents
Advertisement
MODEM 32144
Table 5-1. Hayes Compatible Commands
Command
A
A/
B
B0
B1
C1
D
DS
E
E0
E1
F1
H
H0
H1 or H2
Default settings (where applicable) are in bold face.
*If user profile is active, option can be controlled (for Hayes mode operation)
only by given command or by using Summary Setup. Do not change via
front panel (except via Summary Setup).
112
Function/Explanation
ANSWER No parameters.
REPEAT PREVIOUS COMMAND. No
parameters.
BELL/CCITT COMPATIBILITY MODE*
Selects CCITT V.22 mode (2100 Hz).
Selects Bell 212A mode (2225 Hz).
Modem displays OK; command has no other
effect. (This response—instead of ERROR—
maintains a degree of compatibility with older
modems that support this command.)
ORIGINATE MODE FOR DIALING. No
parameters.
DIAL STORED NUMBER. Parameters are
0-9 (available memory locations).
ECHO
No echo.
Echoes all characters back to terminal screen
when using a full duplex terminal and in local
command mode.
Modem displays OK. Command has no other
effect—unless V.22bis/V.22/V.21/V.23 fallback
operation has been enabled. (For details, see
Automatic Fallback in Chapter 4.)
TELEPHONE SWITCH HOOK
On-hook (hang up).
Off-hook.
Hide quick links:
Advertisement
Table of Contents
