Black Box 32144 Manual page 124

MODEM 32144
Clear-Password Confirmation
Screen:
CONFIRM
NOTE
The change-password and
clear password
mation screens will not be
displayed if the front panel
is disabled.
To change or establish the
automatic password, select
CHANGE from the PASSWORD
screen. The change-password
screen will be displayed. If a
password has been previously
programmed, it will be displayed.
Use the right and left arrow
pushbuttons to move from one
character position to the next.
The character at the current cursor
location will flash on and off. Use
pushbutton 1 to change the
character at the current cursor
location to the next descending
character or pushbutton 3 to
change it to the next ascending
character. Use pushbutton 2 to
skip through groups of characters
(ascending). Use the arrow
pushbuttons to move on to the
next character to be changed.
90
confir-
4.12.4 V P
ALID ASSWORD
Valid password characters are A
through Z (upper case or lower
case), 0 through 9 and the
following symbols: ! " # $ % & ' ( )
* + , - . / Spaces function as valid
password characters; therefore, a
password that includes spaces will
only match another password with
spaces in the same positions. Note,
however, that a space in the first
character position will disable the
password. When the LCD cursor
is in the same position as a space,
the space is shown on the LCD as
a flashing black box; otherwise,
spaces appear as void spaces.
The following paragraph applies
only to the user password entered
in the originating modem when
configuring modems for APP with
callback:
The only valid password
characters are capital A through Z.
If any characters outside this range
are used, callback operation will
not function. No spaces between
the letters are allowed, except that
the user password (as entered on
the front panel) must end with a
space.
C
HARACTERS