Packing A Ptx10003 Chassis Or Component For Shipping; Packing A Ptx10003 Chassis For Shipping - Juniper PTX10003-80C Hardware Manual

Packing a PTX10003 Chassis or Component for Shipping

IN THIS SECTION

Packing a PTX10003 Chassis for Shipping | 171

Packing a PTX10003 Component for Shipping | 172
If you are returning a PTX10003 chassis or component to Juniper Networks for repair or replacement,
pack the item as described in this topic.
Before you pack the chassis or component:
Ensure that you have taken the necessary precautions to prevent electrostatic discharge (ESD) damage.
See "Prevention of Electrostatic Discharge Damage" on page
Retrieve the original shipping carton and packing materials. Contact your JTAC representative if you do
not have these materials, to learn about approved packing materials (see
on page 163).
Ensure that you have the following parts and tools available:
ESD grounding strap.
Antistatic bag, one for each component.
If you are returning the chassis, an appropriate screwdriver for the mounting screws used on your rack.
Packing a PTX10003 Chassis for Shipping
Here's how to pack a PTX10003 for shipping:
1. Power off the PTX10003 and remove the AC power cords or DC power cables. See
PTX10003" on page 125.
2. Remove the cables that connect the PTX10003 to all external devices.
3. Remove all field-replaceable units from the router. See:
Maintaining the PTX10003 Fan Modules on page 131
Maintaining the PTX10003 Power Supplies on page 134
4. Remove the PTX10003 from the rack. See
205.
"Uninstalling the PTX10003" on page
"Contacting Customer Support"
"Powering Off the
151.
171