Juniper PTX10003-80C Hardware Manual page 105

Figure 30: Removing the Slide Rail Screw (PTX10003-80C)
5. Perform one of the following steps:
Use a mechanical lift to position the PTX10003 in the rack so that the front brackets on the front
mounting rails are aligned with the rack holes.
Have two people grasp both sides of the PTX10003, lift it, and position it in the rack so that the front
brackets on the front-mounting rails are aligned with the rack holes.
6. Continue to support the PTX10003 while sliding the rear mounting blades into the channel of the
side-mounting rails. See
Figure 31: Securing the Side Rails to the PTX10003-160C
Figure 31 on page 106 and Figure 32 on page 107.
106