Juniper PTX10003-80C Hardware Manual page 112

WARNING:
or drape where people could trip over it.
4. Connect each power supply to the power sources. Insert the coupler end of the power cord into the
AC power cord inlet on the AC power supply faceplate (see
Figure 40 on page 113).
NOTE: The coupler end of the power cord model is APP-400.
Figure 39: Connecting the AC Power Cord to the PTX10003-160C
Figure 40: Connecting an AC Power Cord to the PTX10003-80C)
Ensure that the power cord does not block access to router components
Figure 39 on page 113 and
113