Packing An Acx5000 Router Or Component For Shipping; Packing An Acx5000 Router For Shipping - Juniper ACX5048 Hardware Manual

Packing an ACX5000 Router or Component for Shipping

IN THIS SECTION

Packing an ACX5000 Router for Shipping | 154

Packing an ACX5000 Router Components for Shipping | 155
If you are returning an ACX5000 router or component to Juniper Networks for repair or replacement,
pack the item as described in this topic.
Before you pack a ACX5000 router or component:
Ensure that you have taken the necessary precautions to prevent electrostatic discharge (ESD) damage.
See "Prevention of Electrostatic Discharge Damage" on page
Retrieve the original shipping carton and packing materials. Contact your JTAC representative if you do
not have these materials, to learn about approved packing materials. See
on page 149.
Ensure that you have the following parts and tools available:
ESD grounding strap.
Antistatic bag, one for each component.
If you are returning the chassis, an appropriate screwdriver for the mounting screws used on your rack
or cabinet.
This topic describes:
Packing an ACX5000 Router for Shipping
To pack a ACX5000 router for shipping:
1. Power down the router and remove the power cables. See
page 140.
2. Remove the cables that connect the ACX5000 router to all external devices.
3. Remove all field-replaceable units (FRUs) from the router.
196.
"Contact Customer Support"
"Powering Off an ACX5000 Router" on
154