Ptx10003-80C Port Panel - Juniper PTX10003-80C Hardware Manual

Figure 5: PTX10003-160C Port Panel
FPC3
FPC2
FPC1
FPC0
1 80 optical interfaces with 80 port LEDs
—
As illustrated in Figure 5 on page
logical PICs, and physical optical ports as follows:
FPCs: The PTX10003-160C has four FPCs, numbered 0, 1, 2, and 3 from the bottom up in the chassis.
PICs: Each FPC has two logical PICs, numbered 0 and 1 from left to right.
Ports:: Each PIC controls 10 QSFP-DD optical interfaces, numbered 0 through 9 from left to right.
The 10 QSFP-DD optical interfaces are divided into two groups of five ports.
Each port group is controlled by two PFEs.

PTX10003-80C Port Panel

Operating in a fixed core router configuration, the PTX10003-80C features flexible interface configuration
options with universal multi-rate double-density Quad Small Form-factor Pluggable (QSFP-DD) optics.
The port panel has 40 optical interfaces which support data rates of 10 Gbps, 25 Gbps, 40 Gbps, 100 Gbps,
200 Gbps, and 400 Gbps. Each of the eight Juniper Networks 1 Tbps ExpressPlus ASICs in the
PTX10003-80C connect to a group of five QSFP-DD ports. You can configure different data rates for each
port group as long as the total throughput for the group does not exceed 1 Tbps. See
QSFP-DD Interfaces and Configurations" on page 28
Figure 6 on page 28 illustrates the PTX10003-80C port panel.
PIC 0
27, the interfaces for the PTX10003-160C are divided into logical FPCs,
0 1
B
2 3
PIC 1
for more details.
"Understanding
27