Unpacking And Mounting The Ptx10003; Unpacking The Ptx10003 - Juniper PTX10003-80C Hardware Manual

of the weight with your legs rather than your back. Keep your knees bent and your back relatively straight
and avoid twisting your body as you lift. Balance the load evenly and be sure that your footing is solid.

Unpacking and Mounting the PTX10003

IN THIS SECTION

Unpacking the PTX10003 | 101

Mounting the PTX10003 in a Rack | 103
Unpacking the PTX10003
The PTX10003 chassis is a rigid sheet-metal structure that houses the hardware components. The PTX10003
is shipped in a cardboard carton, secured with foam packing material. The carton also contains an accessory
kit.
CAUTION:
not unpack the PTX10003 until you are ready to begin installation.
To unpack a PTX10003:
1. Move the shipping carton to a staging area as close to the installation site as possible, but where you
have enough room to remove the system components.
2. Position the carton so that the arrows point upward.
3. Open the top flaps on the shipping carton.
4. Remove the accessory kit.
5. Pull out the packing material holding the PTX10003 in place.
6. Verify the following components are in the box:
PTX10003 routers are maximally protected inside the shipping carton. Do
101