Ptx10003-160C Fru Panel - Juniper PTX10003-80C Hardware Manual

The PTX10003 field-replaceable units (FRU) panel contains fan modules, power supply modules, two
grounding points, and an ESD grounding point. The PTX10003 FRUs are hot-removable and
hot-insertable—you can remove and replace them without powering off the PTX10003 or disrupting the
routing function.
NOTE: If you have a Juniper Care service contract, register any addition, change, or upgrade of
hardware components at https://www.juniper.net/customers/support/tools/updateinstallbase/.
Failure to do so can result in significant delays if you need replacement parts. This note does not
apply if you replace existing components with the same type of component.

PTX10003-160C FRU Panel

The FRU panel for the PTX10003-160C has four power supplies, five fan modules, two chassis grounding
points, and an ESD grounding point. Refer
Figure 8 on page 38 (DC power supplies).
Figure 7: PTX10003-160C FRU Panel with AC/HVDC Power Supplies
1
1 Chassis grounding points
—
2 Power supplies (4)
—
toFigure 7 on page 37
2
4
3 ESD grounding point
—
4 Fan modules (5)
—
(AC/HVDC power supplies) and
1 3
37