Figure 11: At-X530L-52Gpx Twisted Pair Ports - Allied Telesis x530L Series Installation Manual

Chapter 1: Overview
Table 8. AT-x530L-28GPX Twisted Pair Ports 1 - 24 LED Functions (Continued)
LED
PoE
30
Ports State
Solid Green
Solid Amber
Flashing
Amber
1 - 24
Off
AT-x530L-52GPX
The LEDs indicate Link/Activity (L/A) and PoE (PD ON/PD ERR/MAX
CURRENT) information. These LEDs are shown in Figure 11.
Figure 11. AT-x530L-52GPX Twisted Pair Ports
Description
PD On - The switch is delivering power to a
powered device connected to the port.
PD Error - The switch has shut down PoE on the
port because of a fault condition.
PD Max Current - The switch has detected a
powered device on the port but is not delivering
power to it because doing so would exceed its
available power budget.
No PD - This LED state can result from the following
conditions:
- The port is not connected to a powered device or
the device is powered off.
- The port is disabled in the management software.
- PoE is disabled on the port.
- The LEDs are turned off. To turn on the LEDs, use
the eco-friendly button.
L/A LED PoE LED
7 9 11 13
8 10 12 14
15 17
16 18