Initializing HA processes:
atmf_agentd, execd, exfx, hostd, atmfd, auth, epsr
hsl, imi, imiproxyd, lldpd, loopprot, mstp, nsm
pim6d, ripngd, rmon, sflowd, vrrpd, bgpd, irdpd
lacp, ospf6d, ospfd, pdmd, pimd, ripd, udldd
Received event network.initialized
Assigning Active Workload to HA processes:
hsl, irdpd, lacpd, loopprotd, mstpd, nsm, ospfd
ripd, rmond, sflowd, vrrpd, authd, epsrd, imi
imiproxyd, lldpd
Received event network.activated
Loading default configuration
..
done!
Received event network.configured
Figure 43. Switch Initialization Messages (Continued)
After the switch has initialized its management software, go to Chapter 7,
"Configuring the Switch for Stand-alone Operations" on page 91.
x530L Series Installation Guide for Stand-alone Switches
89