Allied Telesis x530L Series Installation Manual page 94

Chapter 7: Configuring the Switch for Stand-alone Operations
94
5. When prompted, type a user name and password to log on the switch.
If this is the initial management session, enter "manager" as the user
name and "friend" as the password. The user name and password are
case sensitive.
The local management session starts when the User Exec mode
prompts.
awplus>
Note
The User Exec mode is the first level in the command mode
interface. For complete information on the modes and commands,
refer to the Software Reference for x530L Series Switches,
AlliedWare Plus Operating System at www.alliedtelesis.com.
6. If you need to disable the VCStack feature, perform the procedure in
"Disabling the VCStack Feature" on page 95.