Figure 32: Installing Four Brackets On The At-X530L-28Gpx And At-X530L-52Gpx Switches - Allied Telesis x530L Series Installation Manual

Figure 32. Installing Four Brackets on the AT-x530L-28GPX and AT-
3. After attaching the brackets, have another person hold the switch on
the plywood base on the wall while you secure it with the M4x32.3mm
screws included with the switch. Refer to Figure 33 on page 78 for the
AT-x530L-28GTX and AT-x530L-52GTX switches or Figure 34 on
page 79 for the AT-x530L-28GPX and AT-x530L-52GPX switches.
Follow these guidelines as you position the switch on the wall:
Position it so that the front panel is facing up, left or right. Refer to

Figure 34. Do not install it with the front panel facing down.
Provide sufficient space from other devices or walls so that you can

access the front and back panels, and for adequate air flow for
ventilation.
x530L Series Installation Guide for Stand-alone Switches
x530L-52GPX Switches
77