Sirona S2 Operating Instructions Manual page 52

Sirona Dental Systems GmbH
Dear Customer
Thank you for your purchase of a C2 dental unit.
On October 1st, 1997 the new era of corporate independnece began for us. Sirona Dental Systems GmbH
is the successor to the former Dental Systems product area of Siemens AG.
Products produced during this transition period will from this time on bear the new company name, without any technical
changes. Your technical documentation with the Sirona logo will therefore be correct, regardless of the name on your system.
Your new unit comes with a set of technical literature, which you should keep close at hand for quick and easy reference. These
Operating Instructions describe your unit with maximum instrumentation.
For daily maintenance of your unit, please refer to the Maintenance Instructions manual.
For treatment instruments, tray, X-ray film viewer and light SIROLUX FANTASTIC see the Operating Instructions which
accompany the respective products. These instructions also enclude maintenance instructions for the components. Prior to
start-up, you must read all Operating Instructions to familiarize yourself with the unit. In order to prevent injury to persons
and damage to the equipment you must also read the Safety Notes.
In order to ensure your rights under the Sirona warranty, you must register the unit by filling out the Unit Passport provided
together with the service technician at the time of installation of your unit.
Your C2 Team
Safety Notes
This unit is not to be used in rooms where an explosion hazard exists.
The pre-installation of the facility must be performed in accordance with the requirements outlined in our "Pre-Installation"
instructions.
As manufacturers of dental and electromedical devices we can only assume responsibility for the safety related performance
of the unit, if maintenance and repair are carried out by us, or by agencies expressly authorized by us for this purpose, and
if needed components affecting the safety of the appliance are replaced exclusively by original spare-parts.
We suggest that you request a certificate stating the type and extent of the work performed, from those performing such work,
if necessary stating any alterations of the rated parameters or operating ranges, as well as date, name of organization and
signature.
This type of appliance is in conformity with the requirements of EN 60601-1: 1990 and EN 60601-1-2. Due to legal regula-
tions, alterations of this treatment unit, which could impair the safety of the operator, patient, or third parties, are not law-
ful! For reasons of product savety, only original Sirona accessories approved for this product, or accessories by third par-
ties, which have been approved by Sirona, may be used. Using non-approved accessories is at the risk of the user.
In order to prevent injury to persons and damage to the equipment you must also read the warning and safety notes
given in these Operating Instructions. These are emphasized with ATTENTION, CAUTION and NOTE.
41 63 189 D 3311
2
D 3311.201.01.10.02