Setting Program; How To Get In Program Setting Screen; Setting Program Procedure - Chroma 19020 User Manual

4.5 Setting PROGRAM

4.5.1 How to Get in PROGRAM Setting Screen

Press MAIN INDEX in any screen will show the following:
MAIN INDEX
01 . PROGRAM
02 . STORE/RECALL

4.5.2 Setting Program Procedure

In MAIN INDEX screen, press ▲, ▼ to move the highlight to [PROGRAM] and press
1.
ENTER to enter into the program setting screen as shown below:
PROGRAM
01. TEST STEP
02. TEST MODE
03. VOLTAGE
04. HIGH LIMIT :
05. LOW LIMIT
06. ARC LIMIT
07. TEST TIME
08. RAMP TIME
09. FALL TIME
10. CHANNELS
1-10
2. When in PROGRAM screen, use Function Keys [NEW] to add new test steps from 1 to
10.
3. Use Function Keys [UP] and [DOWN] to switch to previous or next test step.
4. Press ▲, ▼ to move the highlight to the item to be set and press ENTER to confirm it.
REMOTE LOCK
: 1
: AC
: OFF
0.500
: OFF
: OFF
: 3.0 sec INSERT
: OFF
: OFF
: DEFAULT
REMOTE LOCK
CORR ERROR
UP
DOWN
mA
NEW
DELETE
EXIT
CORR ERROR
Operation
4-15