Changing Password - Chroma 19020 User Manual

FAIL LOCK
UNLOCK:
USER PASSWORD:■
Enter the PASSWORD and press ENTER, the LOCK box returns to normal indicating the
FAIL LOCK is cancelled.

4.4.6 Changing PASSWORD

Setting password for KEY LOCK:
In SYSTEM screen, move the highlight to CHANGE PASSWORD and press ENTER to go to
CHANGE PASSWORD setting screen as shown below:
CHANGE PASSWORD
USER PASSWORD:■
1. Enter the PASSWORD (enter 0000 if it hasn't been set) and press ENTER will prompt a
"NEW PASSWORD" window.
Enter the NEW PASSWORD (maximum 10 characters) and press ENTER will prompt a
2.
"CONFIRM PASSWORD" window.
3. Enter the same password again and press ENTER. A message "CHANGE PASSWORD
OK!" will appear to indicate the password has been changed. Press Function Key [EXIT]
to quit the Setting Screen.
If the memory has been cleared following the description of "Clear the
settings and test procedures in memory" in section 4.4.7, the
PASSWORD will return to initial that is 0000.
EXIT
REMOTE LOCK CORR
EXIT
REMOTE LOCK CORR
Operation
ERROR
ERROR
4-13