Managing Printed Text And Qr Codes; Entering A New Text - FP PostBase Vision Reference Manual

11

Managing printed text and QR codes

PostBase Vision can print freely editable text messages and optionally also QR codes,
including an accompanying message. Depending on the version, you have up to
12 storage spaces available, which can be assigned to a text message or QR code
of your choice. In this chapter, you will learn how to generate, change and delete
these kinds of text messages and QR codes.
11.1

Entering a new text

Managing printed text and QR codes
• Open the M .
ENU
• Choose P
RINTED
• Tap the N T
EW EXT
PostBase Vision opens the on-screen key-
board.
• Enter the desired text.
Note: You have five lines available for your
text. Once the maximum line length has
been reached, PostBase Vision will not
allow you to enter anything further in this
line. You insert line breaks manually.
• Confirm with OK.
The text is stored and appears immediately in
the selection list for advertising imprints.
For information on how to use the on-screen
keyboard, please refer to chapter 4.3.7 on
page 45.
You can also enter new text in the selection
list for advertising imprints directly. As long as
not all storage spaces have been assigned,
the button "New" will appear in the list.
T /QR-C .
EXT ODE
button.
93