Accessories and consumables
• We recommend to use only approved FP equipment and FP original parts.
The manufacturer FP has established reliability, safety and applicability. The man-
ufacturer cannot assess the reliability, safety and applicability for products not
approved by FP, and therefore not vouch for such products. Full functionality of the
PostBase Vision mailing system is only guaranteed at the time of delivery if original
Francotyp-Postalia ink cartridges are used.
• Use the supplied power and connection cables or cables that have been approved
by Francotyp-Postalia. Make sure that the cables are not damaged.
• When handling ink cartridges, observe the hazardous substance labeling and the
product information enclosed with each package.
Avoid eye contact with the ink. Ingestion of the ink can be harmful to health. Keep
the ink cartridges away from children. Detailed information can be found on the
safety data sheet, available at sdb.francotyp.com.
General safety instructions
• Install and commission the PostBase Vision mailing system as described in the
"Installation and commissioning" section.
• Never transport the PostBase Vision mailing system by attachments such as weigh-
ing platform, label compartment, display or drawer. The best way to transport the indi-
vidual components is to hold them on the side at the bottom in the recesses on the
housing.
• If the mailing system was previously in a cold environment (i.e. below 50 °F /
10 °C): Unpack the mailing system and wait at least two hours before connecting
and commissioning the PostBase Vision mailing system. The PostBase Vision
needs this time to adapt to the environmental conditions. Any condensed moisture
will escape.
• The "PostBase Vision Feeder" is designed for operation on the PostBase Vision
postage meter. It is not permissible to operate the Feeder without the
PostBase Vision postage meter.
• Only have maintenance and repair work carried out by qualified personnel
approved by Francotyp-Postalia. Otherwise any warranty claims may become void.
• Note: When a letter is fed, letter transport will start automatically after a short delay.
Do not be startled.
9
For your safety
Need help?
Do you have a question about the PostBase Vision and is the answer not in the manual?
Questions and answers
HOW TO SEND MAIL CERTIFIED
How can you manually adjust the postage rate in Postbase Vision? I need to add more postage to my package.