Postbase Vision Feeder (Optional); Filling With Sealing Liquid - FP PostBase Vision Reference Manual

PostBase Vision Feeder (optional)

16.9
16.9.1

Filling with sealing liquid

We recommend using the SEALIT sealing liquid. This special sealing liquid is
available from Francotyp-Postalia.
Warning! Electrical hazards due to short circuits.
Be extremely careful when handling liquids. If you fill the sealant tank, make
sure not to wetten any parts connected to the mains. If this should happen,
immediately pull the power plugs. Have the PostBase Vision mailing system
checked by the Customer Support before using it again.
• Switch the mailing system off.
3 seconds
The sealant tank is located under the trans-
parent flap. To open the flap:
• Press the release key.
Maintenance and care
137