Installation And Commissioning; Step 1: Unpacking And Checking The Contents Of The Package - FP PostBase Vision Reference Manual

3

Installation and commissioning

This chapter describes how to set up and commission the PostBase Vision mailing
system in the following versions
– with hand feed tray (basic model)
– with manual sealer
– with the "PostBase Vision Feeder".
Caution! Carry out the steps for commissioning the PostBase Vision mailing
system in precisely the given order. Only in this way it is possible to ensure
the successful commissioning of your mailing system.
Step 1: Unpacking and checking the contents of the package
Installation and commissioning
• Unpack all packages.
Keep the packing. Use it again if you need to
transport the mailing system or send it in to
the Customer Support.
• Check that the contents of the packages
are complete and free from any damage.
The scope of delivery is listed on the
following pages.
Warning! Damage or the absence of parts
can lead to injuries and hazards due to
electrical voltage.
Do not start operating the PostBase Vision
mailing system if parts are damaged or miss-
ing. Please contact the Francotyp-Postalia
Customer Support.
17