FP PostBase Vision Reference Manual page 111

A D A
UTO ATE DVANCE
Current Setting
Auto Advance Time
• Follow the instructions in the display:
PostBase Vision displays the selected set-
tings.
• If everything is correct: S
The following table gives an overview of the
possible settings and their meaning.
– possible settings and their meaning:
O PostBase Vision opens a window to set the
N
metering date every day at the set auto
advance time.
The following options are available to you:
– Apply the suggested date
– Select a different date
– Keep the current date.
O The function is not enabled.
FF
: The time determines when the window to
HH MM
(Time of day)
change the metering date should appear in
the display.
Note: Setting the time to 12:00 am (midnight)
switches the function off.
Advanced settings & system information
Set the time of day (when the window to
change the metering date should appear
daily) and choose the desired weekend
mode.
Or
Switch the function off.
.
AVE
111