Calibrating The Touch Screen - FP PostBase Vision Reference Manual

136
PostBase Vision
16.8

Calibrating the touch screen

You have to calibrate the touch screen when operating the screen with your finger or
with the stylus does not work correctly.
• Turn PostBase Vision on.
As soon as the screen displays the start
animation:
• Touch and hold your finger in the
middle of the display until the calibration
procedure starts.
A red circle (the first calibration circle)
appears in the upper left corner.
• Touch the red circle with the stylus.
• Follow the further instructions on the
display: Touch each of the displayed
calibration circles with the stylus.
PostBase Vision will continue its start
routine. The touch screen is now calibrated.