FP PostBase Vision Reference Manual page 103

Synchronize – possible functions and their meaning:
DISCOVER
S S Synchronize with the FP Service.
YSTEM YNC
Sending diagnostic data for service purposes
and updating the machine software, etc.
FP S Synchronize with the customer portal.
YNC
Send the consumption data for convenient
display and analysis in the portal.
Receive updates on cost accounts, user
accesses and adverts, etc. that are available
in the portal.
Note: During operation, PostBase Vision
automatically synchronizes with the portal
about every 5 minutes.
D U Send the postal data prescribed to the
ATA PLOAD
metered postal products.
Note: PostBase Vision automatically
transmits this data daily at midnight
(if PostBase Vision is not turned off) or
immediately after it is turned on.
103
Synchronizing