Manually Moving The Ink Cartridge To The Exchange Position - FP PostBase Vision Reference Manual

17.7 Manually moving the ink cartridge to the exchange
position
If need be, the ink cartridge can be removed without the postage meter running (e.g.
in case the postage meter is defective and is to be send to the Customer Service).
Disconnect PostBase Vision from the mains
Remove all cable connections
• Take the stylus from its carrier behind the
• Turn PostBase Vision off.
The PostBase Vision will complete any cur-
rent actions, lowers the display and then
switches off. The display light and button illu-
mination go out.
3 seconds
• Unplug the power plug from the socket.
On the back of the postage meter:
• Unplug the power cable from the power
• If necessary, remove the ethernet cable:
• If necessary, remove the CAN bus connec-
• If necessary: Remove USB cable.
display. You will need the stylus to operate
the cartridge mechanism.
connection of the postage meter.
Press the spring on the plug and carefully
pull the plug out.
tion to the feeder: Unscrew and carefully
pull off the plug.
Tips for troubleshooting
169