Setting The Meter Imprint - FP PostBase Vision Reference Manual

5

Setting the meter imprint

Advert imprint Advert imprint
This chapter describes the required settings for metering and additional possible
advertising imprints:
– Postage / USPS product (see chapter 5.1)
– Date (see chapter 5.2)
– Advert imprints (see chapter 5.3).
Refer to chapter 5.4 on how to use the "Imprint offset" function to laterally displace
the meter imprint position.
You can test the current meter settings using a zero imprint. Read more about it in
chapter 5.5.
Refer to chapter 6.5 on how use correction imprints for already metered mail pieces.
Note: The examples in this manual show actual postal products. In case the USPS
changes their products / services on short notice, corresponding software updates to
the rate table will be made available to the mailing system in time. However, this does
not apply to the documentation delivered with you mailing system.
Setting the meter imprint
Date Postage
Product details
Serial number of the
postage meter
Data matrix symbol
51