Pararmeters Setting Menu; Parameter Setting; Auto Start/Stop Operation - Smartgen HGM8156 User Manual

Bus includes the following: phase voltage, line voltage, frequency, phase sequence, current, power etc.
SNYC includes the following:
Alarm displays all alarm information, including: warning, shutdown alarm, trip and shutdown and trip but
not shutdown;
Event log: records all start/stop events (shutdown alarm, trip and shutdown alarm, manual/auto
start/stop), real time of occurred alarms, and genset parameters;
Others includes: Time and Date, battery voltage, maintenance due, input/output ports status, network
settings etc.
About includes: released software and hardware version, product PD number.
4.3.2

PARARMETERS SETTING MENU

Press key and enter user menu:
Parameter: Input correct password (factory default is 00318) and you can enter parameter setting
screen.
Language: Simplified Chinese, English and others are optional (others default: Espanol).
Commissioning: On load, off load or defined commissioning can be selected. On load or off load,
commissioning time, after-commissioning mode (manual mode, auto mode, stop mode) can be set for
defined commissioning.
Clear users' accumulation: total power A, and total power B can be cleared up.
4.3.3

PARAMETER SETTING


Mains Set

Timers set

Battery set

Bus set

Breaker set

Switch input port set

output port set

Module set

Scheduling and maintenance set

Synchronization set
NOTE: press and parameter setting can exit directly in setting process.

4.4 AUTO START/STOP OPERATION

Press and indicator beside shall be illuminated, which means genset is in auto mode.
Automatic Start Sequence:
HGM8156 Genset Parallel (With Mains) Controller
HGM8156 GENSET PARALLEL CONTROLLER USER MANUAL
Synchronoscope, power percentage, MSC status etc.
2019-09-10 Version 1.1 Page 12 of 44