Table of Contents
Advertisement
HGM8156 GENSET PARALLEL CONTROLLER USER MANUAL
11.2 MAINS CONTROL MODE
If pre-set value of output power is positive, bus outputs the exceeded active power and inactive power
over pre-set mains power. Mains output power is not more than the pre-set output power value (Mains
Peak Clipping Mode).
If pre-set value of output power is negative, bus outputs pre-set active power and inactive power to
mains; Total power of bus output is the sum of load consumption power and set value of mains output
power.
Mains Peak Clipping Mode:
Fig. 3 Mains Peak Clipping Mode
HGM8156 Genset Parallel (With Mains) Controller
2019-09-10
Version 1.1
Page 36 of 44
Advertisement
Table of Contents
