Smartgen HGM8156 User Manual page 19

No. Functions
1 B-
2 B+
3 Output 7&8 COM
4 Aux. output 7
5 Aux. output 8
6 Aux. output 1
7 Aux. output 2
8 Aux. output 3
9 Reserved
10 Aux. input 1
11 Aux. input 2
12 Aux. input 3
13 Aux. input 4
14 Aux. input 5
15 Aux. input 6
16
17 Reserved
18
19 Aux. input 7
20
21 Aux. output 4
22
23
24 Reserved
25
MSC CAN COM
26
(GND)
27 MSC CAN H
28 MSC CAN L
29
30
Reserved
31
32
33 RS485 COM(GND)
34 RS485A(+)
35 RS485B(-)
36
Aux. output 5
37
HGM8156 Genset Parallel (With Mains) Controller
HGM8156 GENSET PARALLEL CONTROLLER USER MANUAL
Table 12 Terminal Connection Description
Cable Size
2
2.5mm Connects negative of starter battery;
2
2.5mm Connects positive of starter battery.
2
2.5mm Connects B+
2
1.5mm B+ is supplied by 3 points, rated 16A;
2
1.5mm B+ is supplied by 3 points, rated 16A;
2
1.5mm B+ is supplied by 2 points, rated 7A;
2
1.5mm B+ is supplied by 2 points, rated 7A;
2
1.5mm B+ is supplied by 2 points, rated 7A;
/ Reserved terminal; Please don't connect wires.
2
1.0mm Ground connected is active (B-)
2
1.0mm Ground connected is active (B-)
2
1.0mm Ground connected is active (B-)
2
1.0mm Ground connected is active (B-)
2
1.0mm Ground connected is active (B-)
2
1.0mm Ground connected is active (B-)
/ Reserved terminal; Please don't connect wires.
2
1.0mm Ground connected is active (B-)
Normally close outputs, rated 7A
2
1.5mm Public point of relay
Normally open outputs, rated 7A
/ Reserved terminal; Please don't connect wires.
/
Impedance-120Ω shielding wire is recommended with
2
0.5mm single end earth connected.
2
0.5mm
/ Reserved terminal; Please don't connect wires.
/
Impedance-120Ω shielding wire is recommended with
2
0.5mm
single end earth connected.
2
0.5mm
2
2.5mm Normally close outputs, rated 8A
2
2.5mm Normally open outputs, rated 8A
Remark
2019-09-10 Version 1.1
For details
please see
Table 14.
For details
please see
Table 15.
For details
please see
Table 15.
For details
please see
Table 14.
For details
please see
Page 19 of 44