Setting Up The Answering Machine - Siemens Gigaset S685 IP Manual

Operating the base station answering machine

Setting up the answering machine

The answering machine has already been preset at the factory. Make individual
settings using the handset.
Ring delay/cost saving function for remote operation
You can set when you want the answering machine to accept a call.
The options are:
ting Automatic.
In Automatic
u
If there are no new messages, the answering machine answers a call after
20 seconds.
u
If new messages are present, the answering machine accepts a call after
10 seconds.
When operating remotely you can tell after approx. 15 seconds that there are
no new messages (otherwise the answering machine would already have
accepted your call). There will be no call charges if you hang up now.
¢
v Ð
r
§Save§
a
Please note:
You can configure your telephone so that the first ring is suppressed on all
£
calls (
long the phone rings before the answering machine accepts the call.
Setting the recording time
You can set the maximum recording time of a message. You can choose
between:
¢
v Ð
r
§Save§
Setting the recording quality
Set the quality you require for your recordings. The options are:
Excellent. If the quality is higher, the maximum recording time is reduced.
¢
v Ð
r
§Save§
Please note
Your announcements are always recorded in best quality.
120
delay, after
No
mode, the following applies for ring delay:
¢ ¢
Voice Mail Local AM
Select No delay / 10 sec.
Press the display key.
Press and hold (idle status).
Page 91). The time set for ring delay therefore does not indicate how
30 sec, 60 sec, 120 sec
¢ ¢
Voice Mail Local AM
Select the recording time.
Press the display key.
¢ ¢
Voice Mail Local AM
Select the recording quality.
Press the display key.
or
10 sec., 20 sec. 30 sec.
¢
Ring Delay
/ 20 sec. / 30 sec.
or Maximum.
¢
Message Length
¢
Recording Quality
and the cost-saving set-
/ Automatic.
Long Play, High,