Siemens Gigaset S685 IP Manual page 25

Connection Assist.
Start wizard
for entry of VoIP
connection data?
No Yes
New firmware available
New/improved firmware is available for your phone on the Internet. First carry
out an automatic update of the firmware (
completed (after approx. 3 minutes), the idle display of the handset appears
again and the message key f flashes. If you press f, the display shown in
the picture above appears and you can start the connection assistant.
Please note
To protect your phone and its system settings from unauthorised access,
please define a 4-digit number code (system PIN) known only to yourself.
These must also be entered before you can register/de-register handsets, or
alter the VoIP or LAN settings of your phone.
The default system PIN is 0000 (4 x zero). For how to change the PIN,
£
Page 155.
As soon as the handset battery is sufficiently
charged, the message key f on the hand-
set will flash (approx. 20 minutes after you
have put the handset in the charging cradle).
¤
Press the message key f.
You will see the following display.
¤
Press the key under
screen.
You will be prompted to enter your phone's
system PIN.
is shown in the display ...
£
on the display
§Yes§
Page 158). Once the update has
First steps
23