Operating the answering machine
Switching off listen in for the current
recording
a
Press the end call key.
Setting up the answering
machine
The answering machine has already been
preset at the factory. Make individual set-
tings using the handset.
Call acceptance/charge saving
function for remote operation
You can set when you want the answering
machine to accept a call.
The options are:
sec., after
0
10
sec.,
20 sec.
or
and the cost-saving setting
30 sec.
Auto-
matic.
On
the following applies for call
Automatic
acceptance:
u
If no new messages are present, the
answering machine accepts a call after
20 seconds.
u
If new messages are present, the
answering machine accepts a call after
10 Seconds.
When operating remotely you then know
after approx. 15 seconds that there are no
new messages (otherwise the answering
machine would already have accepted
your call). There will be no call charges if
you hang up now.
¢
¢
¢
v
Ð
Voice Mail
Ring Delay
Select r
/
/
/
/
0 sec.
10 sec.
20 sec.
30 sec.
Automatic.
Press the display key.
§Save§
a
Press and hold (idle status).
Please remember:
You can set your telephone so that on all
calls the first ringtone is suppressed
(page 44). Therefore, the time set for the
call acceptance does not indicate how
long the phone rings before the answer-
ing machine accepts the call.
Page 33