Receiving An Sms - Siemens Gigaset S685 IP Manual

SMS (text messages)

Receiving an SMS

All SMS messages received are stored in an incoming message list, regardless
of the number to which they are addressed. Linked SMS messages are displayed
as one message. If this is too long (it consists of too many linked individual SMS
messages) or if it was not fully transmitted, it will be split into several individual
SMS messages.
Since an SMS remains in the list even after it has been read, you should regu-
larly delete SMS messages from the list.
The display tells you if the SMS memory is full.
¤
Delete SMS messages you no longer require (
Incoming message list
The incoming message list contains:
u
All received SMS messages, starting with the most recent.
u
SMS messages that could not be sent due to an error.
New SMS messages are signalled on all Gigaset S68H handsets by the À icon
in the display, the flashing message key f and an advisory tone.
Please note
Every SMS addressed to one of your numbers (VoIP or fixed line network) is
displayed on all registered handsets with SMS functionality – even if the
addressed number is not assigned to the handset as a receive number.
Opening the incoming message list with the
f
Select a mailbox if necessary and enter the mailbox PIN.
The incoming message list is displayed as follows (example):
SMS:
1 Bold: number of new entries
Regular: number of read entries
2 Name of mailbox, here: general mailbox
Open list with
An entry in the list is displayed e.g. as follows:
1234567890
15.12.08 09:45
1 Number of the sender or name of the directory entry
2 SMS status:
Bold: new unread SMS messages
Regular: old read SMS messages
Opening the incoming message box via the SMS menu
¢
v î
84
Press.
1
(2)
2
.
§OK§
1
2
¢ ¢
(Mailbox, mailbox PIN)
SMS
£
Page 85).
f
key
¢
Incoming (2)