Table of Contents
Advertisement
Operating the answering machine of the Gigaset S885 base station
Setting up the answering
machine
The answering machine has already been
preset at the factory. Make individual set-
tings using the handset.
Call acceptance/charge saving
function for remote operation
You can set when you want the answering
machine to accept a call.
The options are:
sec., after
0
or
and the cost-saving setting
30 sec.
Automatic.
In
Automatic
mode, the following applies
for call acceptance:
If there are no new messages, the
answering machine accepts a call after
18 seconds.
If new messages are present, the
answering machine accepts a call after
10 seconds.
When operating remotely you can tell
after approx. 15 seconds that there are no
new messages (otherwise the answering
machine would already have accepted
your call). There will be no call charges if
you hang up now.
v
Voice Mail
r
Select
0 sec.
30 sec.
/ Automatic.
Press the display key.
a
Press and hold (idle status).
Setting the recording time
You can set the maximum recording time
of a message. The options are: 1, 2,
or Maximum.
v
Voice Mail
r
Select recording time.
Press the display key.
38
10
sec.,
18 sec.
Ring Delay
/
10 sec.
/
18 sec.
/
3
mins
Message Length
Setting the recording quality
Set the quality you require for your record-
ings. The options are: Standard, High,
lent. If the quality is higher, the maximum
recording time is reduced.
v
Voice Mail
r
Select the recording quality.
Press the display key.
Changing the language for voice
prompt and pre-recorded
announcement
vL 5 5O2
Enter digits and press
to set Chinese.
2
to set English.
Resetting fast access for the
answering machine using key 1
The integrated answering machine has
already been preset for fast access at the
factory. However, if you have set the net-
work mailbox for fast access (page 18),
you can reset this setting.
v
Voice Mail
/
Answer Machine
Network Mailb.
Select and press
a
Press and hold (idle status).
After you have selected the network mail-
box or the answering machine, press and
hold key
. You will be connected
directly.
The setting for fast access applies to all
Gigaset C47H handsets.
Excel-
Record Quality
Set Key 1
.
Advertisement
Table of Contents
