Setting The Answering Machine Of The Sl150 Colour Base Station; Ring Delay And Charge Saving Function For Remote Operation; Setting The Recording Time And Recording Quality - Siemens Gigaset SL150 colour Instructions Manual

Setting the answering machine of the SL150 colour Base station

Setting the answering machine of the
SL150 colour Base station
The answering machine has already been preset at the factory. However you can make
individual settings using the handset.

Ring delay and charge saving function for remote operation

You can set when you want the answering machine to activate. The options are: 0 sec.,
after 10 sec., 20 sec. (factory setting) or 30 sec. Instead of a fixed ring delay you can
also use the charge-saving setting Auto. In this setting the answering machine acti-
vates automatically:
after 10 seconds if there are new messages;
◆
after 20 seconds if there are no new messages.
◆
After around 15 seconds in remote operation you will know that there are no new mes-
sages (otherwise the answering machine would have already activated). There will be
no call charges if you hang up now.
Please remember:
Only ringer melodieS1 colour-3 are the same as the call tones during a call.
◆
With all ringer tones the first ringer tone is suppressed. You can cancel the suppression
of the first ringer tone (page 80).
¢ ¢
v æ
Ring Delay
r
[RRRRRRRRRRRRRRRRRRRRR]
Save

Setting the recording time and recording quality

You can set the maximum length of a message and its recording quality. The recording
quality determines the total recording time of your answering machine.
The total recording time is up to 9 minutes in the High Quality setting and up to
15 minutes in the Long Play setting.
¢ ¢
v æ
Message Set
either ...
r
or ...
s
Record Quality
r
... then
[RRRRRRRRRRRRRRRRRRRRR]
Save
Select a ring delay (0 sec., 10 sec., 20 sec., 30 sec.,
Auto).
Now press the display key to confirm the setting.
¢
Message Length
Select recording time (30, 60, 120 sec. or Maxi-
mum).
Select the menu item and confirm.
OK
Select Long Play or High Quality.
Now press the display key to store the setting.
63