Handset Settings; Changing The Display Language - Siemens Gigaset S685 IP Manual

Handset settings

Handset settings
Your handset is preconfigured, but you can change the settings to suit your
individual requirements.

Changing the display language

You can view the display texts in different languages.
¢
v Ð
The current language is indicated by
s
a
If you accidentally choose a language you do not understand:
v N 4
s
Parts of the menu are not displayed in the language selected ...
... and three or more handsets are registered on your base station. A language
that is not one of the standard languages for the base station (= English,
French, German, Italian, Spanish, Portuguese and Dutch) is set on at least
three handsets.
Cause: Some display texts are only stored for the standard languages English,
French, German, Italian, Spanish, Portuguese and Dutch on your base station.
In addition, these display texts can be stored in the base station in two other
languages or in another language for two different types of Gigaset handsets.
When selecting the language on the handset, these texts are downloaded to
the base station from the Internet. If another non-standard language is set on
a third handset, then display texts appear in one of the standard languages on
this handset.
The two non-standard languages registered to the handsets with the lowest
internal numbers are saved on the base station.
If there is no further handset registered on the base station whose type and
language setting correspond to an additionally loaded language, then the
memory is freed up. If necessary, the language set for another registered
handset is loaded onto the base station.
144
¢ ¢
Handset Language
Select a language and press
Press and hold (idle status).
Press keys in sequence.
Select the correct language and press
‰
.
.
§OK§
.
§OK§