Siemens Gigaset S685 IP Manual page 141

Level
Set noise level sensitivity
¤
Press the display key
The function is now activated.
You can use the
§Options§
Please note
u
If you do not specify a line suffix (
dialling plans for the number (
dialled via the set default line (VoIP or fixed line network).
u
The room monitor remains activated on the handset even it is switched off
and on again.
Changing the set destination number
¢ ¢
v í
Room Monitor
s
Scroll to the
X
Delete existing number.
¤
Enter number as described in
the destination
Deactivating the room monitor remotely
Preconditions: The room monitor call is diverted to an external destination
number. The telephone called supports tone dialling.
¤
Accept the call from the room monitor and press keys 9 ;.
Your base station sends a confirmation tone and ends the connection.
Please note
Remote deactivation via VoIP connections is possible as long as the DTMF sig-
nals are transmitted (depending on the provider) either as SIP info messages,
audible signals in the voice channel (inband or audio) or as special RTP data
packets (pursuant to RFC2833).
The room monitor function is deactivated on the handset. There will be no fur-
ther room monitor calls. The other room monitor settings (e.g. no ringer) on
the handset will remain activated until you press the display key
handset.
To reactivate the room monitor function with the same phone number:
¤
Turn on the activation again and save with
(Low or High).
to save the changes.
§Save§
display key to switch directly to the baby alarm settings.
£
£
Page
line.
Call to
"Activating the room monitor and entering
£
number" ( Page 138).
Using a handset as a room monitor
Page 46) and you do not define any
197), an external number will be
£
( Page
§Save§
on the
§OFF§
138).
139