Siemens Gigaset S685 IP Manual page 30

First steps
Connection Assist.
Authent. Password:
Ý
If you have made all the required entries, the message
plete" will appear on the display.
Completing the VoIP settings
After the entries have been completed, the handset reverts to idle status.
If all the settings are correct and if the phone can establish a connection to the
VoIP server, the internal name of the handset will be displayed: (example)
Ð
INT
Now you can use your phone to make calls via the fixed line network and the
Internet! Callers can reach you on your fixed line number and your VoIP number.
Please note
u
To ensure that you can always be reached via the Internet, the router must
be permanently connected to the Internet.
u
If you have launched the connection assistant via the menu, you will ini-
tially have to press and hold the end call key
for the handset to return to idle status.
u
If you try to make a call via a VoIP connection that is not configured
correctly, the following VoIP status message will appear in the display:
IP configuration error: xxx
and their respective meanings can be found on
28
OK
à V
INT 1
Time
(xxx = VoIP status code). The various status codes
¤
Use the keypad to enter your password.
¤
Press the key under
screen.
a
once the entry is complete,
Page
on the display
§OK§
"Connection data com-
221.