Siemens Gigaset S685 IP Manual page 222

Service (Customer Care)
You cannot listen to or control a network mailbox.
VoIP:
Your VoIP provider does not support the type of DTMF signalling set up on your phone.
¥
Ask your VoIP provider which signalling it supports and change the settings on your
phone (
Operating the base station within a PABX:
Your PABX is set for dial pulsing.
¥
Set your PABX to tone dialling.
No time is specified for a message in the calls list.
Date and time have not been set.
¥
Set date/time (
¥
Activate base station synchronisation with a time server on the Internet
£
(
The local answering machine announces "PIN is incorrect" during remote opera-
tion.
1. You have entered the wrong system PIN.
¥
Enter the system PIN again.
2. The system PIN is still set to 0000.
¥
Change the system PIN (
The local answering machine is not recording any messages/has switched over to
announce only.
Its memory is full.
¥
Delete old messages.
¥
Play back new messages and delete.
The local answering machine will not record a call or interrupts the recording.
1. An error tone sounds and the display shows
¥
You are making the call via a broadband VoIP connection. A recording is not pos-
sible in this case. The attempt by the base station to establish a non-broadband
connection instead has failed (rearranging the codec).
If necessary, you or the other caller must change the setting for the codec used
£
(
2. The display shows
The answering machine's memory is full.
¥
Use a different handset to delete messages from the answering machine and
restart two-way recording.
Or:
¥
Finish the call, delete old messages from the answering machine and re-establish
the connection.
220
£
Page 201) if necessary.
£
Page 16) or
Page 214).
£
Page 187).
Delete messages..
Page 155).
Not possible.