Setting The Telephone's Default Line - Siemens Gigaset S685 IP Manual

Voice quality and infrastructure
With your Gigaset S685 IP, you have the opportunity to make calls with good
voice quality via VoIP.
However, your phone's performance with VoIP – and therefore the voice quality
– also depends on the properties of the entire infrastructure.
The following VoIP provider components are just some of the things that can
influence performance :
u
Router
u
DSLAM
u
DSL transmission line and speed
u
Connection paths over the Internet
u
If applicable, other applications that also use the DSL connection
In VoIP networks, voice quality is affected by various things including the "qual-
ity of service" (QoS). If the entire infrastructure demonstrates QoS, voice qual-
ity is higher (fewer delays, less echoing, less crackling etc.).
If, for example, the router does not have QoS, then the voice quality is not as
good. Please see the specialist documentation for further information.

Setting the telephone's default line

The default telephone line defines which line type (VoIP or fixed line network)
will be used to dial numbers when you briefly press the c talk key. The
default line is applied to all registered handsets.
¤
Open the following Web page:
Area: Default Connection
¤
Select the default line for your phone. This can be done by selecting option
or
VoIP
¤
Now select
Please note
u
The default line is only relevant when dialling numbers that are not subject
to dialling plans and are entered without a line suffix.
u
You can change the settings for the default line via any registered handset
£
( Page
after
Fixed Line Linetype for outgoing calls
to activate your settings.
Set
157).
Web configurator – setting the phone using a PC
¢
Settings Telephony
.
¢
Number Assignment.
191