Setting The Alarm Clock; Activating/Deactivating The Alarm Clock And Setting The Wake-Up Time; Deactivating The Wake-Up Call/Repeating After A Pause (Snooze Mode) - Siemens Gigaset S685 IP Manual

Setting the alarm clock

Precondition: The date and time have already been set (

Activating/deactivating the alarm clock and setting the wake-up time

¢
v ì
¤
Change multiple line input:
Activation
Select
Time
Enter the wake-up time in 4-digit format.
Occurance:
Select
Volume:
Set the volume (1–6).
Melody:
Select melody.
¤
Press the display key
You will see the ì icon.
A wake-up call with the selected ringer is signalled on the handset. The wake-
up call sounds for 60 seconds. ì is shown in the display. If no key is pressed,
the wake-up call is repeated twice at five minute intervals and then switched
off.
During a call, the wake-up call is only signalled by a short tone.

Deactivating the wake-up call/repeating after a pause (snooze mode)

Precondition: A wake-up call is sounding.
§OFF§
or
§Snooze§
On or Off.
Daily or Monday-Friday.
§Save§
Press the display key. The wake-up call is deactivated.
Press the display key or any key. The wake-up call is deactivated and
then repeated after 5 minutes. After the second repetition the
wake-up call is deactivated completely.
to save the changes.
Setting the alarm clock
£
Page 16).
131